A rectifier diode is a semiconductor device that can convert alternating current energy into direct current energy. It has unidirectional conductivity and usually includes a PN junction with two terminals, positive and negative. Current can only flow in from the positive terminal and out from the negative terminal.
Categories：Product knowledge Date：2025-03-14 Hits：337 View »
Transient interference of voltage and current is the main cause of damage to electronic circuits and equipment, often causing incalculable losses to people
Categories：Product knowledge Date：2025-03-13 Hits：348 View »
A diode has two terminals, anode and cathode, and current can only flow in a single direction. That is to say, current can flow from the anode to the cathode, but not from the cathode to the anode.
Categories：Product knowledge Date：2025-03-13 Hits：342 View »
A diode has two terminals, anode and cathode, and current can only flow in a single direction. That is to say, current can flow from the anode to the cathode, but not from the cathode to the anode.
Categories：Product knowledge Date：2025-03-13 Hits：367 View »
Semiconductor diodes are used in almost all electronic circuits and play an important role in many circuits. They are one of the earliest semiconductor devices and have a wide range of applications.
Categories：Product knowledge Date：2025-03-12 Hits：321 View »
The drivers of these power transformers involve isolated gate MOSFETs
Categories：Product knowledge Date：2025-03-12 Hits：315 View »
The subthreshold swing is a performance indicator that measures the rate of transition between the on and off states of a transistor. It represents the amount of change in gate voltage required for the source drain current to change tenfold, also known as the S factor. The smaller the S, the faster the on/off rate.
Categories：Product knowledge Date：2025-03-12 Hits：385 View »
By utilizing the energy storage characteristics of capacitors and inductors, high-frequency switching is performed through controllable switches (MOSFETs, etc.) to store input electrical energy in capacitors (inductors). When the switch is turned off, the electrical energy is released back to the load, providing energy as a switching power supply. The ability of its output power or voltage is related to the duty cycle (the ratio of the switch conduction time to the entire switch period). Switchi
Categories：Product knowledge Date：2025-03-11 Hits：339 View »
When the frequency is an AC signal input to a nonlinear component diode transistor, the original sine wave signal will generate DC, fundamental components, and second and third harmonic components. Then, through a frequency selection network, the desired frequency band can be selected to obtain the desired frequency band signal for multiplication.
Categories：Product knowledge Date：2025-03-11 Hits：354 View »
The main application areas of Schottky diodes are switching power supplies or SMPS, with operating frequencies exceeding 20 kHz.
Categories：Product knowledge Date：2025-03-11 Hits：320 View »
